How to Install Mgcamd on OpenATV..
Posted: Sat Nov 14, 2020 3:40 pm
Here is a tutorial picture of the installation and configuration MGCAMD the decoder Vu + Dreambox under OpenATV picture 6.2.
- MGCAMD 1.45a (MIPS CPU) OpenATV (Vu + zero, uno, solo, solo2, dreambox DM520, DM820, - MGCAMD 1.35a (ARM CPU) VU + SOLO4K, UNO 4K, ZERO 4K, Dreambox 900 4K. DM920. 1- assembly softcam MG CAMD,
- Start WinSCP
-File protocol: FTP
-Hot Name: 192.168.1.200 (the IP address of your Vu +, Dreambox)
-Username: root
-Password: " empty "
-After clicking registration
- Select ipk file and click drag between the two windows on the folder / tmp made.
-Press the blue button on the remote control, then Extensions.
-IPK installer.
- Memory / tmp
- Restore setting.
- Select the IPK file with OK then press the green button to start the installation.
- The installation was completed successfully.
2 - copy of the subscription MG CAMD
- Start Winscp and copy files from your MGCAMD subscription to the path / usr / keys of your Vu +
-cccamd.list
-mg_cfg
3 - Startup MGCAMD
- Press the BLUE button again , select Softcam.
- Softcam panel
-Change by arrows softcam MG CAMD
-Press the GREEN button to start it.
[/color]
- MGCAMD 1.45a (MIPS CPU) OpenATV (Vu + zero, uno, solo, solo2, dreambox DM520, DM820, - MGCAMD 1.35a (ARM CPU) VU + SOLO4K, UNO 4K, ZERO 4K, Dreambox 900 4K. DM920. 1- assembly softcam MG CAMD,
- Start WinSCP
-File protocol: FTP
-Hot Name: 192.168.1.200 (the IP address of your Vu +, Dreambox)
-Username: root
-Password: " empty "
-After clicking registration
- Select ipk file and click drag between the two windows on the folder / tmp made.
-Press the blue button on the remote control, then Extensions.
-IPK installer.
- Memory / tmp
- Restore setting.
- Select the IPK file with OK then press the green button to start the installation.
- The installation was completed successfully.
2 - copy of the subscription MG CAMD
- Start Winscp and copy files from your MGCAMD subscription to the path / usr / keys of your Vu +
-cccamd.list
-mg_cfg
3 - Startup MGCAMD
- Press the BLUE button again , select Softcam.
- Softcam panel
-Change by arrows softcam MG CAMD
-Press the GREEN button to start it.
[/color]