How to upgrade Hellobox V5 software through RS232 port..
Posted: Sun Oct 25, 2020 10:32 pm
1. Copy bin file to USB device and change file name to "hellobox.bin"
Note:The disk format must be FAT32
2. Insert the USB device to Hellobox V5 receiver
3. Connect Hellobox V5 with computer through RS232 cable
Note:RS232 cable must be cross cable(pin2 to pin3,pin3 to pin 2)
4. Run "WinSTBUpgrader.exe" on computer
5. Select and Open serial port
6. Click "download" page, select config file "k5_ddr2_4M.xml"
7. Click "Start"
8. Power on Hellobox V5, and wait...
After upgrading done, Hellobox V5 will reboot automatically.
Please enjoy and download the RS232 tool here..
Note:The disk format must be FAT32
2. Insert the USB device to Hellobox V5 receiver
3. Connect Hellobox V5 with computer through RS232 cable
Note:RS232 cable must be cross cable(pin2 to pin3,pin3 to pin 2)
4. Run "WinSTBUpgrader.exe" on computer
5. Select and Open serial port
6. Click "download" page, select config file "k5_ddr2_4M.xml"
7. Click "Start"
8. Power on Hellobox V5, and wait...
After upgrading done, Hellobox V5 will reboot automatically.
Please enjoy and download the RS232 tool here..