How to upgrade Hellobox V5 software through RS232 port..

Image
discussions, firmware, information, tutorials, software and tools for HelloBox Receivers
User avatar
sanjay kumar
Posts: 36455
Joined: Thu Oct 22, 2020 11:26 am
Location: india
Has thanked: 20454 times
Been thanked: 1324 times

How to upgrade Hellobox V5 software through RS232 port..

Post by sanjay kumar »

1. Copy bin file to USB device and change file name to "hellobox.bin"
Note:The disk format must be FAT32
2. Insert the USB device to Hellobox V5 receiver
3. Connect Hellobox V5 with computer through RS232 cable
Note:RS232 cable must be cross cable(pin2 to pin3,pin3 to pin 2)
4. Run "WinSTBUpgrader.exe" on computer
5. Select and Open serial port
6. Click "download" page, select config file "k5_ddr2_4M.xml"
7. Click "Start"
8. Power on Hellobox V5, and wait...
After upgrading done, Hellobox V5 will reboot automatically.

Please enjoy and download the RS232 tool here..
V5_upg_tool.rar
- No Card sharing discussion allowed on this forum.
- Note: Viewing Pay TV without a valid subscription is illegal.
- All the files available here are kept for experimental and educational purpose only.
Top
User avatar
Bilal Ahmad
Posts: 9
Joined: Sun Oct 31, 2021 12:48 am
Has thanked: 4 times
Been thanked: 3 times

Re: How to upgrade Hellobox V5 software through RS232 port..

Post by Bilal Ahmad »

sanjay kumar wrote: Sun Oct 25, 2020 10:32 pm 1. Copy bin file to USB device and change file name to "hellobox.bin"
Note:The disk format must be FAT32
2. Insert the USB device to Hellobox V5 receiver
3. Connect Hellobox V5 with computer through RS232 cable
Note:RS232 cable must be cross cable(pin2 to pin3,pin3 to pin 2)
4. Run "WinSTBUpgrader.exe" on computer
5. Select and Open serial port
6. Click "download" page, select config file "k5_ddr2_4M.xml"
7. Click "Start"
8. Power on Hellobox V5, and wait...
After upgrading done, Hellobox V5 will reboot automatically.

Please enjoy and download the RS232 tool here..
V5_upg_tool.rar
Please sir ineed tool
Top
User avatar
sanjay kumar
Posts: 36455
Joined: Thu Oct 22, 2020 11:26 am
Location: india
Has thanked: 20454 times
Been thanked: 1324 times

Re: How to upgrade Hellobox V5 software through RS232 port..

Post by sanjay kumar »

Bilal Ahmad wrote: Fri Aug 12, 2022 8:46 pm
sanjay kumar wrote: Sun Oct 25, 2020 10:32 pm 1. Copy bin file to USB device and change file name to "hellobox.bin"
Note:The disk format must be FAT32
2. Insert the USB device to Hellobox V5 receiver
3. Connect Hellobox V5 with computer through RS232 cable
Note:RS232 cable must be cross cable(pin2 to pin3,pin3 to pin 2)
4. Run "WinSTBUpgrader.exe" on computer
5. Select and Open serial port
6. Click "download" page, select config file "k5_ddr2_4M.xml"
7. Click "Start"
8. Power on Hellobox V5, and wait...
After upgrading done, Hellobox V5 will reboot automatically.

Please enjoy and download the RS232 tool here..
V5_upg_tool.rar
Please sir ineed tool
https://download1532.mediafire.com/u7bd ... g_tool.rar
- No Card sharing discussion allowed on this forum.
- Note: Viewing Pay TV without a valid subscription is illegal.
- All the files available here are kept for experimental and educational purpose only.
Top

Return to “HelloBox”