In July, client firstly finished installation on their site and told us antenna operate well now. They shared with us various photos which were taken during their installation. You can clearly see that our TVRO antenna structure including foundation part, kingpost part, reflector part and feed system, which makes our antenna can be assembled easily and quickly based on provided detailed installation manual. Installation guide service by engineer remotely is available as well.
Hoisting reflector of 3.7m TVRO antenna to kingpost by crane
The reflector is supported by a galvanized steel kingpost that provides the required stiffness for pointing and tracking accuracy, and it can be installed on the ground or rooftop. Foundation as a kind of necessary part, it is important for all antenna system performance. Generally, client is tend to cement pouring foundation for fixed site installation. Due to some instructions, we also have non- penetrating foundation(NPM) for options, which can resist high wind as pouring foundation and can be moveable to another site if necessary.
3.7m TVRO antenna reflector with kingpost
Also, the reflector manufactured with high quality aluminum and steel materials, is with high rigidity. The antenna reflectors can bear two persons to stand on, so the installers can stand on the antenna reflectors without any worry during installation and debugging. Even the antenna performance can not be affected. Here you can see that client are installing antenna feed with standing on reflector.
Install feed of 3.7m TVRO antenna
3.7m TVRO antenna installation finished
Rear view of 3.7m TVRO antenna