OSCam r11711-798 with icam patch for Sky DE

[sugar]

OSCam r11711-798 with icam patch for Sky DE

Code: Select all

1. Accept OSCAM config files and enter old line in the reader.

2. in the Enigma settings/extras (ATV: MENU/SETTINGS/OPERATION & INTERFACE/ system settings):

Set Integrate ECM in HTTP streams to YES
Decrypt HTTP Streams NO
Decrypt received HTTP streams NO

3. Install OScam binary ARM
simply exchange old oscam binary under path var/bin
ATTENTION: The name of the new binary must be changed to the name of the old binary.

4. If OScam doesn't start, libcrypto 0.9.8 is probably missing. This can be fixed with a symlink via the console:

Check which libcrypto version you have by going to the folder:

/usr/lib/
or
/lib/

to: libcrypto.so

Looking for.

Depending on the version, then run the following commands via Telnet:

ln -s /usr/lib/libcrypto.so.1.0.2 /usr/lib/libcrypto.so.0.9.8

or

ln -s /lib/libcrypto.so.1.0.2 /usr/lib/libcrypto.so.0.9.8

Version 1.0.2 serves as a placeholder... match this to the version you find in your box.

5. Import channel list.
Copy the file to etc/enigma2 and then edit the bouquets.tv file there and enter the following:
#SERVICE 1:7:1:0:0:0:0:0:0:0:FROM BOUQUET "userbouquet.SkyICAM.tv" ORDER BY bouquet

Pyur: In the Sky iCam channel list in the references, replace the C00000 with FFFF0000

Then restart the box and everything should work

__________________

[bino]

Hello friend, I did everything as you say to do but it didn't work. But thanks for sharing.

[sanjay kumar]

Hello friend, I did everything as you say to do but it didn't work. But thanks for sharing.

in *ipk format that installs them all

enigma2-plugin-softcams-oscam-icam-mipsel_11711_all.ipk.rar

enigma2-plugin-softcams-oscam-icam-arm_11711_all.ipk.rar

[zapppa]

Didn't work 4 me also.

[dishfan]

this should be installed if you have the right card?

[bino]

I can open only 3 channels.

[Popeye]

the file is working fine just for confirmation, please in conversation avoid cs discussiion, stay only in setup problems.
in the Sky iCam channel list in the references, replace the C00000 with FFFF0000 Then restart the box and everything should work.

[zapppa]

Vu Zero Blackhoke is compatible?

I can't find this settings:
Set Integrate ECM in HTTP streams to YES
Decrypt HTTP Streams NO
Decrypt received HTTP streams NO

[franklin84]

I found this settings under menu, service/operation/appeareance, Extras.
Don't know if it is the right translation!?

I installed the ipk on a gigablue ue4k.
It wont work!
I found all bouquets and edited it to FFFF0000 but its dark!
Maybee it is depending on the carrier? I have *ky from cable!