I Have an Amiko mini combo 2015, Don’t know model number but one of the chips is CH455H.
I did a search of Astra 2 satellite and saved it to USB to rearrange the order with ali channel editor. Saved list to USB as default data base instead of user data base. When I reloaded the channel list into the Amiko mini combo and reset the receiver, the receiver never booted. Now stuck ON and on and no video output.
Tried to locate original firmware for this box with RS232 to USB PC with no suggest.
I’m not sure if had the proper firmware version.
Searched the internet for hours and no sugsest. plenty of firmware for the Amiko mini combo extra.
Had a look inside and the Chip is CH455H.
Also, not sure if I had the proper RS232 to USB cable as I have two cables one 3 pin audio and 4 pin audio jacks.
Dose anyone have step by guilde to recover the box.
Thanks for reading this post
Have a good day
Bye For Now
