1. Copy bin file to USB device and change file name to "hellobox.bin"
Note:The disk format must be FAT32
2. Insert the USB device to Hellobox V5 receiver
3. Connect Hellobox V5 with computer through RS232 cable
Note:RS232 cable must be cross cable(pin2 to pin3,pin3 to pin 2)
4. Run "WinSTBUpgrader.exe" on computer
5. Select and Open serial port
6. Click "download" page, select config file "k5_ddr2_4M.xml"
7. Click "Start"
8. Power on Hellobox V5, and wait...
After upgrading done, Hellobox V5 will reboot automatically.
Please enjoy and download the RS232 tool here..
How to upgrade Hellobox V5 software through RS232 port..
- sanjay kumar
- Posts: 30984
- Joined: Thu Oct 22, 2020 11:26 am
- Location: india
- Has thanked: 17147 times
- Been thanked: 1283 times
- Contact:
How to upgrade Hellobox V5 software through RS232 port..
- No Card sharing discussion allowed on this forum.
- Note: Viewing Pay TV without a valid subscription is illegal.
- All the files available here are kept for experimental and educational purpose only.
- Note: Viewing Pay TV without a valid subscription is illegal.
- All the files available here are kept for experimental and educational purpose only.
- Bilal Ahmad
- Posts: 9
- Joined: Sun Oct 31, 2021 12:48 am
- Has thanked: 4 times
- Been thanked: 3 times
Re: How to upgrade Hellobox V5 software through RS232 port..
Please sir ineed toolsanjay kumar wrote: ↑Sun Oct 25, 2020 10:32 pm 1. Copy bin file to USB device and change file name to "hellobox.bin"
Note:The disk format must be FAT32
2. Insert the USB device to Hellobox V5 receiver
3. Connect Hellobox V5 with computer through RS232 cable
Note:RS232 cable must be cross cable(pin2 to pin3,pin3 to pin 2)
4. Run "WinSTBUpgrader.exe" on computer
5. Select and Open serial port
6. Click "download" page, select config file "k5_ddr2_4M.xml"
7. Click "Start"
8. Power on Hellobox V5, and wait...
After upgrading done, Hellobox V5 will reboot automatically.
Please enjoy and download the RS232 tool here..
V5_upg_tool.rar
- sanjay kumar
- Posts: 30984
- Joined: Thu Oct 22, 2020 11:26 am
- Location: india
- Has thanked: 17147 times
- Been thanked: 1283 times
- Contact:
Re: How to upgrade Hellobox V5 software through RS232 port..
https://download1532.mediafire.com/u7bd ... g_tool.rarBilal Ahmad wrote: ↑Fri Aug 12, 2022 8:46 pmPlease sir ineed toolsanjay kumar wrote: ↑Sun Oct 25, 2020 10:32 pm 1. Copy bin file to USB device and change file name to "hellobox.bin"
Note:The disk format must be FAT32
2. Insert the USB device to Hellobox V5 receiver
3. Connect Hellobox V5 with computer through RS232 cable
Note:RS232 cable must be cross cable(pin2 to pin3,pin3 to pin 2)
4. Run "WinSTBUpgrader.exe" on computer
5. Select and Open serial port
6. Click "download" page, select config file "k5_ddr2_4M.xml"
7. Click "Start"
8. Power on Hellobox V5, and wait...
After upgrading done, Hellobox V5 will reboot automatically.
Please enjoy and download the RS232 tool here..
V5_upg_tool.rar
- No Card sharing discussion allowed on this forum.
- Note: Viewing Pay TV without a valid subscription is illegal.
- All the files available here are kept for experimental and educational purpose only.
- Note: Viewing Pay TV without a valid subscription is illegal.
- All the files available here are kept for experimental and educational purpose only.