SIMPLE TRICK TO SOLVE SPORT 24 AUTOROLE POWERVU KEY ON OPENBOX Z5MINI
Posted: Sun Oct 25, 2020 12:35 pm
STEPS TO UPGRADE YOUR OPENBOX Z5MINI
DOWNLOAD THIS LINK.....https://www.dropbox.com/s/7gqcyh7l0oox7ju/rom.bin?dl=0
Copy the software to flash drive or memory card and rename it to rom.bin
Insert usb drive or memmory card into your deoder.
Reboot or power off and on, and hold on RED Z DESIGN button on the front of your decoder for about 15seconds till you see blue picture or the front panel of the decoder start counting, remove your hand from button.
Wait till upgrade finish after 2-3 minutes, immediately remove the flash drive or memmory card from your decoder when it reboot itself.
Press exit to the screen and scan the channels back and wait for about 30seconds to bring picture.
AUTO UPDATE VIA ONLINE: You must first set up NETWORK by press menu—-settings—Network config—Link Type, choose type available for you e.g wifi network,3G network, USB network, LAN, after successful set up wait till you get message showing “Network connection success” then press exit to the screen and then wait for about 5-10seconds to receive message on your tv screen”new softcam.key detected. upgrade now, press yes to upgrade new softcam.key online and wait till you get “Load success”. then tune to any of the powervu channels and wait for about 15-30seconds the picture will comes up shortly. or
MANUALLY UPDATE: press menu—-settings (if access control is missing on alphabox dial 2778) or navigate to access control on openbox z5 mini/azplay and aone decoder dial 2778 to have enter access control menu, but navigate to “online” wait for about 15seconds scroll down to softcam, press OK, then navigate to left hand on softcam, press OK, wait for about 5seconds to get “loading” OK, then press exit to the screen and tune to any of the powervu channels and the picture will instantly comes up and showing.
enjoying while last………………………..
DOWNLOAD THIS LINK.....https://www.dropbox.com/s/7gqcyh7l0oox7ju/rom.bin?dl=0
Copy the software to flash drive or memory card and rename it to rom.bin
Insert usb drive or memmory card into your deoder.
Reboot or power off and on, and hold on RED Z DESIGN button on the front of your decoder for about 15seconds till you see blue picture or the front panel of the decoder start counting, remove your hand from button.
Wait till upgrade finish after 2-3 minutes, immediately remove the flash drive or memmory card from your decoder when it reboot itself.
Press exit to the screen and scan the channels back and wait for about 30seconds to bring picture.
AUTO UPDATE VIA ONLINE: You must first set up NETWORK by press menu—-settings—Network config—Link Type, choose type available for you e.g wifi network,3G network, USB network, LAN, after successful set up wait till you get message showing “Network connection success” then press exit to the screen and then wait for about 5-10seconds to receive message on your tv screen”new softcam.key detected. upgrade now, press yes to upgrade new softcam.key online and wait till you get “Load success”. then tune to any of the powervu channels and wait for about 15-30seconds the picture will comes up shortly. or
MANUALLY UPDATE: press menu—-settings (if access control is missing on alphabox dial 2778) or navigate to access control on openbox z5 mini/azplay and aone decoder dial 2778 to have enter access control menu, but navigate to “online” wait for about 15seconds scroll down to softcam, press OK, then navigate to left hand on softcam, press OK, wait for about 5seconds to get “loading” OK, then press exit to the screen and tune to any of the powervu channels and the picture will instantly comes up and showing.
enjoying while last………………………..