Share your Dish Setup and Dish alignment details here , Useful information related to satellite receiving system topics found here, terms, definitions, etc!.
3.7m ku earth station antenna well matched with client’s Kingpost
This June, one of European customers purchased from us 1 set of 3.7m ku earth station antenna without kingpost and foundation template structure. When the antenna arrived, they install our hub,panel and back structure with their kingpost in their yard. They told us it was not difficult and during the installation process, client is mostly installed by themselves, sometimes we guide client remotely like the panel assemble. Finally, they finished the installation of all the antenna system and send us several photos below, which match well and the signal is good as well. Here please leave us some time to share with you details below.
As you know, except for this 3.7m ku earth station antenna, it is not the first time that Antesky customized component structure according to client requirement and provide considerate after-sales service to client. In previous 2014, Guatemala client bought from us only the panel part of 1.8m vehicle mounted antenna and to match with their own pedestal structure for broadcasting business. There is no doubt that these worked well.
Since these antenna systems are composed of many different parts, the regular maintenance should attach much more importance.
The fixed antenna system is mainly composed of antenna main body including panel, back structure, sub-reflector, feed network, azimuth and elevation device, antenna control system(motorized antenna apply) and fastener accessories.
If you are interested in our antenna equipment or this 3.7m ku earth station antenna, please contact with us directly. Thanks.