Tiger One Million 4k flash & dump file..
- sanjay kumar
- Posts: 30097
- Joined: Thu Oct 22, 2020 11:26 am
- Location: india
- Has thanked: 16955 times
- Been thanked: 1283 times
- Contact:
Tiger One Million 4k flash & dump file..
Tiger One Million 4k flash & dump file..
- If Your Tiger One Million Receiver goes to Red-light or blank display. It means your receiver software corrupted. Now to recover the Tiger One Million Satellite receiver you need a flash & dump software file..https://www.mediafire.com/file/4r1xxnwp ... P.zip/file
- If Your Tiger One Million Receiver goes to Red-light or blank display. It means your receiver software corrupted. Now to recover the Tiger One Million Satellite receiver you need a flash & dump software file..https://www.mediafire.com/file/4r1xxnwp ... P.zip/file
- No Card sharing discussion allowed on this forum.
- Note: Viewing Pay TV without a valid subscription is illegal.
- All the files available here are kept for experimental and educational purpose only.
- Note: Viewing Pay TV without a valid subscription is illegal.
- All the files available here are kept for experimental and educational purpose only.
- sanjay kumar
- Posts: 30097
- Joined: Thu Oct 22, 2020 11:26 am
- Location: india
- Has thanked: 16955 times
- Been thanked: 1283 times
- Contact:
Re: Tiger One Million 4k flash & dump file..
Software in pendrive via booting or via Rs 232 cable stb loader
- No Card sharing discussion allowed on this forum.
- Note: Viewing Pay TV without a valid subscription is illegal.
- All the files available here are kept for experimental and educational purpose only.
- Note: Viewing Pay TV without a valid subscription is illegal.
- All the files available here are kept for experimental and educational purpose only.
Re: Tiger One Million 4k flash & dump file..
So nothing like rename the software?
And no remote key to press right?
And no remote key to press right?
- sanjay kumar
- Posts: 30097
- Joined: Thu Oct 22, 2020 11:26 am
- Location: india
- Has thanked: 16955 times
- Been thanked: 1283 times
- Contact:
Re: Tiger One Million 4k flash & dump file..
- No Card sharing discussion allowed on this forum.
- Note: Viewing Pay TV without a valid subscription is illegal.
- All the files available here are kept for experimental and educational purpose only.
- Note: Viewing Pay TV without a valid subscription is illegal.
- All the files available here are kept for experimental and educational purpose only.
- sanjay kumar
- Posts: 30097
- Joined: Thu Oct 22, 2020 11:26 am
- Location: india
- Has thanked: 16955 times
- Been thanked: 1283 times
- Contact:
Re: Tiger One Million 4k flash & dump file..
I think dump file Tiger One Million Series Upgrade with RS232 Loader..
- Tiger One Million 4k dump
https://www.mediafire.com/file/nmzhvn5f ... P.zip/file
- Tiger One Million 4k dump
https://www.mediafire.com/file/nmzhvn5f ... P.zip/file
- No Card sharing discussion allowed on this forum.
- Note: Viewing Pay TV without a valid subscription is illegal.
- All the files available here are kept for experimental and educational purpose only.
- Note: Viewing Pay TV without a valid subscription is illegal.
- All the files available here are kept for experimental and educational purpose only.
Re: Tiger One Million 4k flash & dump file..
That "ali rs232 upgrade tool v1.2.0" you uploaded doesn't show the text (Com, Link File Open Exit etc.)
I tried the usb flash dump file but couldn't get it to work, on an Arabic site it says when it shows boot, keep pressing the power button on remote until you see the letter E. I've tried that & all I get everytime is BOOT - USB - E0001 then nothing happens so after a few hours I gave up.
I bought a "USB To RS232 TTL UART PL2303HX Converter USB to COM Serial Cable Adapter" a while back & tried that, after a very long time I got it to work using a Windows XP laptop, it didn't work with Windows 11.
I've put everything including instructions in a zip file.
https://www.mediafire.com/file/rnbnf04l ... P.zip/file
I tried the usb flash dump file but couldn't get it to work, on an Arabic site it says when it shows boot, keep pressing the power button on remote until you see the letter E. I've tried that & all I get everytime is BOOT - USB - E0001 then nothing happens so after a few hours I gave up.
I bought a "USB To RS232 TTL UART PL2303HX Converter USB to COM Serial Cable Adapter" a while back & tried that, after a very long time I got it to work using a Windows XP laptop, it didn't work with Windows 11.
I've put everything including instructions in a zip file.
https://www.mediafire.com/file/rnbnf04l ... P.zip/file
Re: Tiger One Million 4k flash & dump file..
I finally got it to work with the USB.
You don't use the Dump File, any ordinary firmware will work, just rename it UPDATE.bin
WARNING - For some reason if you're using the recent firmware updates this receiver goes into reboot when you go to the EBS channels on 9E .
I've found it's better to use the original firmware "TIGER One Million_V4.08_02062021" to update by USB, then update to the latest firmware on the box.
I've uploaded this V4.08 firmware to mediafire - https://www.mediafire.com/file/ah12serd ... 1.bin/file
1. Put the firmware on the usb and rename it: UPDATE.bin
2. Turn the receiver off and then on again while usb is connected.
3. Press the OFF power button on the remote control continuously until you see the box updating on the front panel, (It should read BOOT - USB & then start loading the firmware).
4. Once finished the box will reboot.
If you have the latest firmware installed you need to delete the 2 EBS channels on 9e or the box will get stuck on reboot if you go to them.
You don't use the Dump File, any ordinary firmware will work, just rename it UPDATE.bin
WARNING - For some reason if you're using the recent firmware updates this receiver goes into reboot when you go to the EBS channels on 9E .
I've found it's better to use the original firmware "TIGER One Million_V4.08_02062021" to update by USB, then update to the latest firmware on the box.
I've uploaded this V4.08 firmware to mediafire - https://www.mediafire.com/file/ah12serd ... 1.bin/file
1. Put the firmware on the usb and rename it: UPDATE.bin
2. Turn the receiver off and then on again while usb is connected.
3. Press the OFF power button on the remote control continuously until you see the box updating on the front panel, (It should read BOOT - USB & then start loading the firmware).
4. Once finished the box will reboot.
If you have the latest firmware installed you need to delete the 2 EBS channels on 9e or the box will get stuck on reboot if you go to them.
Last edited by mike142 on Mon Jun 26, 2023 4:18 am, edited 3 times in total.